Manual Focus IR Lens 19mm f/1.0
Manual Focus IR Lens 19mm f/1.0
Model
GLM1910E2

Item specifics

LWIR Lens
19mm f/1.0
Applications
Thermal imaging monocular/binoculars
Mechanical Interface
Thread

Review

Description

  • Specifications
  • Download file
  • FAQ
  • Video
  • Applications
Specifications

Optical

Focal Length[mm]
19
F/#
1.0
Wavelength
8-12µm
Focus Range
1m-Infinity
Detector
256X192 12µm
HFOV/VFOV
3.1°/2.3°

Mechanical

Interface
Thread
Focus Mechanism
Manual
Dimensions [mm]
Φ30X28.32
Weight
<35g

Environmental

Operating Temperature
-40℃ to +60
Storage Temperature
-40℃ to +80
External Coating
DLC/AR
Front Element Sealing
IP67
Download document
file name
type
download
PDF
FAQ
- Why the lens autofocus is not clear?

There are many reasons why the lens autofocus is not clear, the main reasons are as follows which can be checked one by one:

1. During the focusing process, there is a large moving target in the lens screen (occupying more than 1/3 of the picture), can be refocused;

2.If the lens is used for a long time, the gear, CAM and other transmission parts wear and tear, resulting in unclear focus, the module or control board parameters can be adjusted to make the focus clear again;

3. Hardware problems, such as potentiometer does not work, replace the hardware that does not work.

- Why can not the lens control board or module connect to the computer?

There are many reasons why the lens control board and the computer cannot be connected, the main reasons are as follows which can be checked one by one:

1. Replace the USB port, which may be incompatible with the data cable;

2.Replace the data cable,maybe the data cable is not compatible with the computer or the cable data is wrongly selected;

3. Confirm the wiring of the module or the control board, maybe the wiring is loose;

4.Module or control board hardware problem, replace the hardware.

VIDEO
APPLICATIONS
Hand-held Thermal Imaging Devices
Homeland Security
Thermal Imaging Body Temperature Screening