Clipon Thermal Imager
Clipon Thermal Imager
Model
COTI

Item specifics

Power Supply
4.5V-16V
Repetition rates
max 2Hz
Operating Temperature
-35℃-+73℃
Range[m]
1400/2500/3300

Review

Description

  • Specifications
  • Download file
  • FAQ
  • Video
  • Applications
Specifications

Performance Indicators

Resolution
640×512
Pixel size
12μm
Focal length
11.5mm
FOV
30.5°
Coverage of 40°  Objective lens
76%
Modes
Complete Thermal/Hybrid/Outline
Adjustment
Brightness/Frequency
Auto Brightness Control
Yes
Image correction
Yes
Video Output
(PAL\DC-5V)
Operating Temp
-40℃ - +60℃
IP Rating
IP67
weight
93g
Download document
file name
type
download
Clipon Thermal Imager
PDF
FAQ
- Why the lens autofocus is not clear?

There are many reasons why the lens autofocus is not clear, the main reasons are as follows which can be checked one by one:

1. During the focusing process, there is a large moving target in the lens screen (occupying more than 1/3 of the picture), can be refocused;

2.If the lens is used for a long time, the gear, CAM and other transmission parts wear and tear, resulting in unclear focus, the module or control board parameters can be adjusted to make the focus clear again;

3. Hardware problems, such as potentiometer does not work, replace the hardware that does not work.

- Why can not the lens control board or module connect to the computer?

There are many reasons why the lens control board and the computer cannot be connected, the main reasons are as follows which can be checked one by one:

1. Replace the USB port, which may be incompatible with the data cable;

2.Replace the data cable,maybe the data cable is not compatible with the computer or the cable data is wrongly selected;

3. Confirm the wiring of the module or the control board, maybe the wiring is loose;

4.Module or control board hardware problem, replace the hardware.