Thermal Imaging Cores
Thermal Imaging Cores
Thermal Imaging Cores
Thermal Imaging Cores
Model
D02 Core28h-640s

Item specifics

Operating Temperature
-20℃~+60℃
Operating Voltage
12V
Communication Interface
RS232/RS422

Product review

Description

  • Specifications
  • Download file
  • FAQ
  • Video
  • Applications
Specifications

Underlying Parameters

Resolution
640*512
Pixel Pitch
17μm
Wavelength
8-14μm
Frame Rate
50Hz
Bad Pixels Detection and Replacement
NETD
40mk(F/1,3000K,30HZ)
Noise Reduction Filter

Auto Shutter Controls

Weight
150g
Operating Temperature
-20℃~+60
Storage Temperature
-40℃~+71

Opto-electronics

One-click Autofocus
Connected to the DC motor

Potentiometer Connection

Encoder Connection
×
Focus Time
≤ 6s
Automatic Focusing

Electronics

Black Hot/White Hot
Black Hot/White Hot
Pseudo Colour Palette
6
Cross Cursor
4 types for choose
AGC Image Correction
Image Brightness
Image enhancement
FLIP Horizontal/Vertical
Vertical/level
Digital Zoom
1-20 times
Background Correction
Operating Voltage
12V
Maximum Power Consumption
≤1.5W
System Parameter Reset

Input/Output

Analogue Video Output Format
PAL/NTSC
Analogue Video Output Interface
BNC female
Digital Video Output Format
Default BT656
Digital Video Output Interface
Without
Communication Interface
RS232/RS422
Power Interface
DC5x2.1 female
Download document
file name
type
download
D02 Core28h-640s Thermal Imaging Cores
PDF
FAQ
- Why the lens autofocus is not clear?

There are many reasons why the lens autofocus is not clear, the main reasons are as follows which can be checked one by one:

1. During the focusing process, there is a large moving target in the lens screen (occupying more than 1/3 of the picture), can be refocused;

2.If the lens is used for a long time, the gear, CAM and other transmission parts wear and tear, resulting in unclear focus, the module or control board parameters can be adjusted to make the focus clear again;

3. Hardware problems, such as potentiometer does not work, replace the hardware that does not work.

- Why can not the lens control board or module connect to the computer?

There are many reasons why the lens control board and the computer cannot be connected, the main reasons are as follows which can be checked one by one:

1. Replace the USB port, which may be incompatible with the data cable;

2.Replace the data cable,maybe the data cable is not compatible with the computer or the cable data is wrongly selected;

3. Confirm the wiring of the module or the control board, maybe the wiring is loose;

4.Module or control board hardware problem, replace the hardware.

VIDEO
APPLICATIONS
Airborne
Sample Content
Enhanced Vision
Sample Content
Homeland Security
Sample Content
Maritime & Naval
Security & Surveillance
Thermal Imaging Body Temperature Screening